ELEVATING / WORK PLATFORMS
|
| D |
|
 |
Bally Lifts |
Raise one worker and equipment up to 21' working heights
with the versatile, economical Bally/Lift.Combining a safe, simple hydraulic system with
today's innovative features gives you the most efficient personnel lift of its type.
Two high mobility models include a cantilevered platform for safe horizontal and vertical
access to hard-to-reach locations.
d |
Options:
- Platform controlled power drives: AC, DC, or Air- Hydraulic
- 120 Volt outlet on platform
- Tool tray
- Fluorescent tube holder
|
|
Cantilevered
Platform
|
|
|
|
Working
Height |
Platform Height
Max. Min. |
Platform Size
L W |
Specify Model No. |
Wt. [lbs.] |
| 21' |
15' 6'4" |
20" 28" |
3G02-BL-315 |
590 |
| Cantilevered Platform |
| 20' |
14' 6'4" |
64" 20" |
3G02-BL-C14 |
900 |
|
| d |
|
 |
| MRO
Telescoping Hydraulic Maintenance Lifts |
Helps maintenance workers get jobs done quickly and safely
with easy mobility and high speed elevation. Four state-of-the-art models with working
heights to 34', designed and constructed to meet/exceed ANSI requirements.
d |
Features:
- Rated capacity 500 lbs./two persons
- Select from maximum platform heights of 15', 19', 24' or 28'
- Roomy 28" x 36" platform accommodates two workers
- Totally enclosed platform with 42" guardrails, midrails and gate;
4" toeboards and non-slip deck
- Built-in ladder with flat, skid-resistant treads and grab rails provides
access to platform in fully lowered position
- Rails fold for doorway passage and easy storage
- Welded compact base frame with non-marking 8" casters for easy
rolling and maneuverability
- Self-storing outriggers extend from base to provide maximum stability
- Leveling jacks secure unit to floor and compensate for uneven surfaces
- Bubble levels indicate proper leveling, essential for safe operation
- Safety Orange finish for high
visibility
- Platform controls: for operator safety both hands are required to change
elevation
- Emergency stops:
- located on platform for operator use
- emergency stop also located on base for use by ground personnel. Lockable to prevent
unauthorized use
- Meets/exceeds ANSI safety standards
|
d
Working
Height |
Platform Height |
Specify Model Number |
| Max. |
Min.* |
Model |
WT. (lbs.) |
| 21' |
15' |
6' 4" |
3G02-MR-15-AC
3G02-MR-15-DC |
800
930 |
| 25' |
19' 3" |
6' 4" |
3G02-MR-20-AC
3G02-MR-20-DC |
1000
1130 |
| 30' |
23' 8" |
6' 7" |
3G02-MR-24-AC
3G02-MR-24-DC |
1200
1330 |
| 34' |
28' |
6' 10" |
3G02-MR-28-AC
3G02-MR-28-DC |
1420
1550 |
|
|
|
|
 |
| Lift Order Picker |
It's never been easier or quicker to raise
one worker and equipment up to 16' working heights than with the versatile, manually
propelled Order Picker.
Effortless operation starts with the absence of outriggers*
-no set-up time. Just lock two casters, step onto platform,
lock gate and elevate to your working height.
The 12 Volt DC power system raises and lowers the totally enclosed
platform quickly and safely.
*Designed for relatively smooth, level floor surfaces
Features: |
Standard
- Rated capacity: 300 lbs./ one person
- totally enclosed 26"x28" platform with 42" guardrails,
midrails and gate: 4" toeboards and skid-resistant deck
- Welded compact base frame with 6" casters (2 are locking swivel
casters)- for easy rolling and maneuverability
- Standard finish is chip-resistant gray enamel paint.
- 12 Volt DC power (for raising and Lowering) includes battery and
charger-80 to100 raise and lower cycles between charges on a normal 8-hour shift
- Raised deck heights:-Ground Entry-9' 6" -One Step Entry-10' 6"
|
Optional
- Removable Tool Tray (mounts on side of guardrails)
- Fluorescent Tube Holder
- Two heavy-duty- 6-volt batteries in series for prolonged user application
|
|
|
|
| d |
|
 |
|
|
| Eight standard models allow four workers access up to 33'
working heights. These 1000 lbs. capacity high-performance work platforms are equipped
with low maintenance hydraulic systems and are available with AC, DC, or Air-motor drives.
Custom lifts are available with special deck sizes and configurations,
cantilevers and power options. All models have back-up safety features for worker
security.
s |
| Features |
|
- Rated capacity 1000 lbs./four persons
- Totally enclosed platform with 42" guardrails, midrails, 4"
toeboards and swing-in gate
- Large 3' x 8' platform with serrated grating deck to assure secure
footing
- Built-in ladder provides access to platform in fully lowered position
- Boxed scissor members and oversize cross-axles reduce platform sway
- Sturdy rectangular base frame with non-marking 8" swivel casters for
easy rolling and maneuverability. Casters have combined wheel and swivel locks
- Self-storing outriggers extend from base to provide maximum stability
[optional on lower height models]
|
- Leveling jacks secure unit to floor and compensate for uneven surfaces
[standard on models with raised deck heights above 15', optional on lower height models]
- Bubble levels indicate proper leveling, essential for safe operation
- Safety Orange finish for high
visibility
- Meets/exceeds ANSI A92.3-1990 code requirements
- Platform controls: for operator safety both hands are required to change
elevation
- Emergency stops:
- located on platform for operator use
- emergency stop also located on base for use by ground personnel. Lockable to prevent
unauthorized use
|
|
|
| d |
|
 |
Crossovers |
| To get the most use from a minimum amount of floor
space, our crossovers provide safe, convenient access over conveyors, assembly lines,
piping or other obstructions. The comfortable 48° stair slope allows worker to
descend facing outward. Any combination of 6 stair heights and 5 bridge lengths is
available in 3 standard widths to satisfy most requirements. Custom sizes and
configurations are also available. |
Features:
- Supplied in three pieces: two stair sections and one
bridge
- Structural frame and rails are heavy 1¼"
schedule 40 pipe
- Standard step and bridge tread: expanded metal or
serrated grating
[Optional solid steel tread with abrasive mat on bridge is available to avoid debris
falling onto conveyors]
- Full rails, midrails and toeboards
- Stair sections have 10" step spacing with 9" of
horizontal run per step
- Each stair section has four legs with large, pre-drilled
plates to bolt to floor
- Standard finish is gray enamel
- Rated capacity 600 lbs.
- Maximum use of limited floor space while complying to
OSHA requirements
|
|
Industrial Crossovers
Safe, convenient access over conveyors, assembly lines, etc.
- Heavy-duty-, all-welded steel construction
- Any combination of 6 heights, 5 lengths and 3 widths. Other sizes
available upon request.
- Crossovers supplied with full rails, including handrails and toeboards,
to OSHA specifications.
- Your choice of open, self-cleaning treads or solid treads with non-skid
surface.
- Crossover designed to afford maximum use of floor space while still
complying to OSHA requirements.
- Capacity 600 lbs. with 4 to 1 safety factor (per OSHA).
- Finish enamel.
|
No. of Steps
[each section] |
Vertical
Clearance
[inches] |
27" Overall Width
Expanded Metal
|
31½" Overall Width
Serrated Grating
|
38½" Overall Width
Serrated Grating
|
|
|
Model |
Lbs |
Model |
Lbs |
Model |
Lbs |
| 2 |
28 |
2G02-CS227
253 |
2G02-CS231 254 |
2G02-CS238 276 |
| 3 |
38 |
2G02-CS327 310 |
2G02-CS331 325 |
2G02-CS338 351 |
| 4 |
48 |
2G02-CS427
378 |
2G02-CS431 393 |
2G02-CS438 428 |
| 5 |
58 |
2G02-CS527
445 |
2G02-CS531 465
|
2G02-CS538 505 |
| 6 |
68 |
2G02-CS627
517 |
2G02-CS631 537 |
2G02-CS638 583 |
| 7 |
78 |
2G02-CS727
600 |
2G02-CS731 630 |
2G02-CS738 680 |
|
|
| D |
|
 |
Forklift Platforms
Used with a forklift to reach high places safely
Perform maintenance projects and order picking safely with a
Forklift Platform. The non-slip floor plate deck is surrounded by a 4" toe plate to
contain loose objects. Units are held securely to lift truck by a safety chain; 52"
high side rails and positive locking gate keep worker safe. Worker is separated from
vehicle by expanded metal screen. Full length 2¾" x 8" fork pockets ensure easy
fork entry and exit.
Platforms can be customized with optional 3" casters for mobility,
tool trays to keep parts and tools at worker’s fingertips, 24" and 84" high
bolt-on riser screens and a tube and bulb caddy to contain long parts requiring on-end
storage. Casters provide 1000 lb. capacity and increase overall height of unit by
4½". Forklift Platforms conform to ASME/ANSI Standard B56.1a-1995.
Yellow Enamel Finish - Knocked Down: |
P/N |
Platform
( W x D) |
Height |
Fork
Pocket Spacing |
Weight |
| 3M06-MPL1 |
36" x
32" |
45" |
16¼"
Centers 8" Apart |
152 lbs |
| 3M06-MPL2 |
36" x
36" |
|
|
163 lbs |
| 3M06-MPL3 |
36" x
48" |
|
|
198 lbs |
| 3M06-MPL4 |
48" x
40" |
|
28¼"
Centers
20" Apart |
207 lbs |
| 3M06-MPL5 |
48" x
48" |
|
|
230 lbs |
| D |
|
|
|
|
| Forklift
Platform Accessories |
P/N |
Description |
|
|
Weight |
| 3M06-CK3P |
For 3"
Polyolefin Swivel Casters |
|
|
8 lbs |
| 3M06-TT36 |
Tool Tray –
36" wide |
|
|
7 lbs |
| 3M06-TT48 |
Tool Tray –
48" wide |
|
|
9 lbs |
| 3M06-BCR36 |
24" Riser
Screen – 36" wide |
|
|
16 lbs |
| 3M06-BCR48 |
24" Riser
Screen – 48" wide |
|
|
22 lbs |
| 3M06-BCR36-84 |
84" Riser
Screen – 36" wide |
|
|
29 lbs |
| 3M06-BCR48-84 |
84" Riser
Screen – 48" wide |
|
|
36 lbs |
| 3M06-FBC |
Tube and Bulb
Caddy |
|
|
19 lbs |
|
|