FIRE HOSES
|
|
D |
 |
Rack & Reel Fire Hose
D |
| Is fully lined and FM Labeled. Has an acceptance test
pressure of 500 PSI and a service test of 250 PSI. Each section comes already folded for
ease of installation on pin racks. NOTE: This inexpensive light weight hose is designed
for use as emergency fire hose only! It should never be used for wash down or any other
purpose. |
| P/N |
Description |
| 1-RR1.5X50 NST or NPSH |
50’ x 1½" Brass |
| 1-RR1.5X75 NST or NPSH |
75’ x 1½" Brass |
| 1-RR1.5X100 NST or NPSH |
100’ x 1½" Brass |
|
|
|
D |
 |
Single
Jacket Fire Hose
d |
| Has a burst pressure of 750 PSI, an acceptance test
pressure of 500 PSI, a service test of 250 PSI and is FM Labeled. Made of 100% polyester,
rubber lined material for strength and flexibility. Recommended for industrial fire
protection. |
| P/N |
Description |
| 1-SJ1.5X50 NST or NPSH |
50’ x 1½" Brass |
| 1-SJ1.5X100 NST or NPSH |
100’ x 1½" Brass |
| 1B02-SJ2550NST or NPSH |
50’ x 2½" Brass |
| 1B02-SJ25100NST |
100’ x 2½" Brass |
|
|
|
D |
 |
U.L. Labeled Single Jacket Fire Hose
d |
Has a burst pressure of 750 PSI,
an acceptance test pressure of 500 PSI and a service test of 250 PSI. Made of 100%
polyester, rubber lined material for strength and flexibility. Recommended for industrial
fire protection. |
| P/N |
Description |
| 1B02-SJ50ULNST |
50’ x 1½" Brass |
| 1B02-SJ75ULNST |
75’ x 1½" Brass |
| 1B02-SJ100ULNST |
100’ x 1½" Brass |
| 1B02-SJ2550ULNST |
50’ x 2½" Brass |
|
|
|
D |
 |
Double
Jacket Fire Hose
d |
Has a burst pressure of 1200
PSI, an acceptance test pressure of 800 PSI and a service test of 400 PSI., meets NFPA
1962 and is FM Labeled Made of 100% polyester, rubber lined material for strength and
flexibility. Recommended for industrial fire protection. |
| P/N |
Description |
| 1-DJ1.5X50 NST or NPSH |
50’ x 1½" Brass |
| 1-DJ1.5X100 NST |
100’ x 1½" Brass |
| 1-DJ2.5X50 NST |
50’ x 2½" Brass |
|
|
|
D |
 |
Yellow
Polymer Fire Hose
d |
Has the same specifications as
our standard double jacket hose except that the outside jacket is independently and
completely impregnated with abrasion resistant, water repellent polymer. Available in
aluminum couplings only. |
| P/N |
Description |
| 1B02-DJ50YHANST |
50’ x 1½" |
| 1B02-DJ2550YHANST |
50’ x 2½" |
|
|